GRAPHTEC FC5100A-100, User Manual

Page: 82 / 201

Advanced Functions and Settings: DATA SORTING - Sorting the Cut Data
82
• Press the F3 key to turn AREA sorting ON or OFF. Press the F4 key to turn
PEN sorting ON or OFF
.
• Press the ENTER key to store your setting. If the sorting OFF is selected,
return to the previous menu.
If sorting ON is selected, the following menu will appear.
• Press the F3 key to select CONTINUE or press the F4 key to select CANCEL
for the data sorting mode setting.
If CONTINUE is selected, the MEDIA TYPE MENU then appears. Select the
media type you wish to use.
• Press the F1 key to select ROLL-1, press the F2 key to select ROLL-2, press
the F3 key to select SHEET. The following menu appears:
The plotter immediately begins sorting when it receives the cut data from the
PC.
DATA SORTING
.
AREA ON *
PEN OFF *
DATA SORTING> .
AXIS ALIGNMENT> .
AUTO PRE FEED> .
TANGENT EMULATION> .
THIS OPERATION
RESETS THE PLOTTER! .
CONTINUE> .
CANCEL> .
ROLL-1> .
ROLL-2> .
SHEET> .
CONTINUE> .
CONDITION 1 ........ 14 .
........ 30 .
SORTING ... ........ 4 .
CB09Ux ... 0 .