GRAPHTEC FC5100A-100, User Manual

Page: 176 / 201

Specifications: Main Specifications: FC5100A-75
176
Chapter 9: Specifications
This chapter describes the plotter’s main specifications
Main Specifications: FC5100A-75
CPU 16-Bit
Configuration Grit-rolling cutting plotter
Drive Digital servo
Max. Cut Width (expanded mode) 758 mm (29.6 in.)
Guaranteed precision cutting area 9m (30 ft.) with approved media
Max. Loadable Media Width 914 mm (36 in.)
Max. cutting speed (Axial) 1414 mm/sec (55.7 ips) Diagonal Direction
Cutting Pressure 10 to 500 g
Min. character size 3mm (0.125 in.) alphanumeric Helvetica med. Font
Mechanical resolution 0.005mm (0.0002 in.)
Programmable resolution
GP-GL: 0.01mm (0.0004 in.) and HP-GL
TMa
0.025mm (0.001in.)
a. HP-GL is a trademark of Hewlett-Packard Company
Number of cutters/pens 1
Cutter types Supersteel, ceramic and sapphire blades
Pen types Water and oil based fiber-tip, water based ballpoint, ceramic, refillable ink,
and disposable ink pens
Pounce types 1.2mm diameter pin
Compatible media Mono-vinyl chloride media, fluorescent media, and media for illuminated
displays, high reflective media, up to 0.25mm thick, Sandblast rubber up to
1mm thick
b
b. Using CB15U-K30 blades to cut sandblast rubber
Standard interfaces RS-232C, Centronics, USB (USB1.1 Full Speed)
Buffer memory 2 Mb
Resident command sets HP-GL, GP-GL
LCD Panel LCD 20x4 - Supports 12 languages: Danish, Dutch, English, French, Ger-
man, Hungarian, Italian, Japanese, Norwegian, Portuguese, Spanish,
Swedish
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Power supply 100-240VAC/48-62 Hz Universal Power Supply
Power consumption 140VA max.
Operating environment Temperature: +10º C to +35º C or +50º F to +95º F
Humidity: 35% to 75% (non-condensing)
External dimensions without stand 1135mm x 350mm x 485 mm or 44.5" x 14" x 19"
Weight 29 kg or 64 lbs.