GRAPHTEC FC5100A-100, User Manual

Page: 104 / 201

Advanced Functions and Settings: AUTO REG. MARK - Auto Registration Mark Sensor
104
• Press the F3 key to select ENABLED. A mark appears next to the current set-
ting
• Press the ENTER key to register your setting and display the following screen.
• Select 2, 3, or 4 and then press the ENTER key to advance to the next menu.
• Press the F1, F2 or F3 key to select the number you wish to store the settings
under.
A mark appears next to the current setting.
• Press the F3 key or the F4 key to select the axis for setting the distance.
• Press the LEFT or RIGHT ARROW key to move the blinking cursor for selecting
the digit, and then press the UP or DOWN ARROW key to change the number.
• The value representing the distance between registration mark 1 and mark 2 is
stored in the X-axis. The value representing the distance between registration
mark 1 and mark 3 is stored in the Y-axis.
MARK SCAN MODE
ENABLED *
DISABLED *
MARK SCAN MODE
2POINTS *
3POINTS *
4POINTS *
SCAN MARK ........ .. 1> .
2> .
3> .
MARK POSITION
X = ... 0000 mm *.
Y = ... 0000 mm *.