GRAPHTEC FC5100A-100, User Manual

Page: 62 / 201

Preparing to Cut: Changing Feed Speed
62
• Press the F3 key to select NORMAL or the F4 key to select SLOW.
• Press the ENTER key to return to the previous menu.
• Press the NEXT key to advance to the next menu.
• Press the F4 key to set parameters such as STEP SIZE, RS232C CONDITIONS
AND COMMANDS. For details see Setting the Interface Conditions.
• Raise the media set lever to engage the media. The media type menu appears
on the display; press the key which corresponds to the type of media that is
loaded for cutting/plotting.
• Press the F1 key to select ROLL-1.
• Press the F2 key to select ROLL-2.
• Press the F3 key to select SHEET.
• Press the F4 key to select CONTINUE.
INITIAL FEED SPEED
.......... NORMAL .
SLOW .
AUTO REG. MARK> .
AUTO PRE FEED> .
INITIAL FEED SPEED> .
INTERFACE> .
ROLL-1> .
ROLL-2> .
SHEET> .
CONTINUE> .