GRAPHTEC FC5100A-100, User Manual

Page: 66 / 201

Advanced Functions and Settings: COPY - Copying the Data in Plotter Buffer Memory
66
Origin Point with
ROTATE function
NOTE: The coordinates being displayed represent displacements along the X and Y-
axes from the original origin.
NOTE: If you intend to use the ORIGIN function in combination with the ROTATE or
MIRROR function, be sure to set the ORIGIN function first.
COPY - Copying the Data in Plotter Buffer Memory
This function allows you to automatically cut duplicates of the data sent from the
computer.
The data sent from the computer is always stored automatically in the plotter’s
receive buffer while it is cutting/plotting. Once the data has been stored in the
plotter’s receive buffer, it can be repeatedly cut by using this function.
CAUTION: While a copy operation is in process, do not send new data to the plotter.
Use the UP, DOWN, RIGHT or LEFT ARROW keys to move the cutter to the
desired starting position for cutting, this is the Copy origin.
• Press the COPY key to select the COPY mode.
If the data for copy is available in the receive buffer, the following menu will
appear:
COPY SPACE
1 mm