GRAPHTEC FC5100A-100, User Manual

Page: 169 / 201

Setting the Interface Functions: STEP SIZE - Setting the Programmable Resolution
169
NOTE: Be sure to set the step size to match the step size setting of your software
application.
NOTE: Your step size setting is retained in the plotter’s internal memory even while the
plotter is turned off.
• Press the F2 key to select STEP SIZE.
• Press the F1 key to select 0.100, press the F2 key to select 0.050, press the F3
key to select 0.025, or press the F4 key to select 0.010.
• Press the Enter key to register your setting and return to the INTERFACE menu.
STEP SIZE> *
RS-232C> *
COMMAND> *
STEP SIZE ....... 0.100>
*
IN mm ......... 0.050> *
0.025> *
0.010> *
STEP SIZE> *
RS-232C> *
COMMAND> *