GRAPHTEC FC5100A-100, User Manual

Page: 113 / 201

Advanced Functions and Settings: AUTO REG. MARK - Auto Registration Mark Sensor
113
• Press the F3 key to select OTHER SETUPS
• Press the F2 key to select SENSOR OFFSET ADJ.
• Press the F3 or F4 key to select METHOD 1 or METHOD 2
Select either METHOD 1 or METHOD 2
S
ELECTING
METHOD 1
The plotter scans a printed cross mark and then plots a second cross mark
based on the reading of the printed cross mark. The plotter then adjusts for offset.
• Press the POSITION key to move the pen near to the pre-printed cross mark.
• Press the F4 key to select SCAN
The plotter scans the pre-printed cross mark, then plots the cross mark.
MARK SCAN MODE> *
MARK TYPE> *
OTHER SETUPS> *
DISTANCE ADJUST> *
MARK SIZE> *
SENSOR OFFSET ADJ> *
AXIS ORIGIN OFFSET> *
PAPER-WEIGHT> *
SENSOR OFFSET ADJUST
METHOD 1
> .
METHOD 2 > .
SENSOR OFFSET ADJUST
PARAMETER SET> .
SCAN> .
Printed target mark
Media feed
direction
Move the pen into this area.