Furuno FSS-3BB, Operator'S Manual

Page: 60 / 121

2. GRAPH FUNCTIONS
2-12
[ID1]/[ID2] menu
1. Click the [Advanced Settings] icon ( ) from the InstantAccess bar™, then click
the [Advanced Settings] icon ( ) to show the [Advanced Settings] window
2. Click [ID1] or [ID2].
3. If necessary, adjust settings, referring to the table on the next page.
4. Click the [OK] button to confirm settings, or [Cancel] to restore previous settings.
Item Description
[Select Fish Specie1] -
[Select Fish Specie3] Effective when [Reference Auto Select] is turned on. Set
fish species with [Select Fish Specie1] -
[Select Fish Specie3]. See section 2.2.3.
[Draw Method] Effective when [Reference Auto Select] is turned off. Set
the method by which to draw the echo histogram.
• [Average]: Averages the model data selected for each
fish species and displays a histogram of average value.
• [All]: Displays a histogram of all selected model data.
[Reference Auto Select] Turn this item on to get automatic selection of the three
fish species with the highest similarity among the fish spe-
cies set in [Select Reference (Auto)] below.
[Select Reference (Auto)] Effective when [Reference Auto Select] is turned on. Set
the fish species. See page 2-5.
[Offset]
Corrects the histogram of the IDENTI-FISH
™
echo dis-
play. For example, if there is a difference from the model
data at the time of factory shipment, or if the measure-
ment results gradually deviate from the histogram of the
model data, enter an offset to compensate for the devia-
tion.
[Updating Cycle]
Sets the interval at which to update the IDENTI-FISH
™
graph.
[Selected Area Scroll] Turn this item on to scroll the measurement range accord-
ing to the sounder display.
[Measurement Range] Sets the range for measuring school of fish.
[Standard]: Measure to the seabed.
[Entire Range]: Measure the entire range including the
depth below the seabed.
Since measurement of the IDENTI-FISH
™
graph is not
performed below the seabed, the echoes from schools of
fish may be mistaken for the seabed, which can affect
measurement results and accuracy. If this occurs, use
[Entire Range].
FSS-3BB [ 0252470-xx.xx ]