Furuno FSS-3BB, Operator'S Manual

Page: 83 / 121

4. ADVANCED SETTINGS
4-5
4
[Net Depth Mark] • [Net Depth Mark]: Shows/hides the net
depth mark (depth at the installation po-
sition of the net sonde transmitter) on the
high and low frequency displays.
• [Mark ID]: Assign the net depth mark and
net sonde/net sensor ID (ID number of
the transmitter you want to display depth
information). Set net depth mark ID as
follows:
1) Click the (
) icon to show the [Mark ID]
window.
2) Set the net sonde/net sensor ID corre-
sponding to the net mark number (0 -
15). For example, to set [Net ID0] as
[ID20], click the arrow buttons (
) for
[Net ID0] to set [20].
Note: The same ID number cannot be
set for net mark 0 to net mark 15.
3) Click the [OK] button to confirm setting,
or click the [Cancel] button to escape
and restore previous setting.
• [Mark Color]: Sets the color for the dis-
played net depth marks and the temperature graph.
1) Click the (
) icon to show the color selection pop-up window.
2) Select the appropriate sonde number at the right-side of the col-
or selection pop-up window.
3) Adjust the slider bar to change the displayed color of the sonde.
4) Click [OK] to confirm the changes, or click [Cancel] to cancel the
changes.
• [Mark Width]: Sets the thickness of the sonde line. The higher the
setting the thicker the line.
• [Net Sensor Temp Graph]: The assigned net mark ID (0 - 15) ap-
pears on the net water temperature graph. The graph displays only
one mark ID.
[Transparency] Adjusts the level of transparency for the fish size graph, IDENTI-
FISH
™
graph, and the water temperature graph. A higher setting in-
creases the transparency, however the graph bars, scale and indica-
tions in the graph are not made transparent.
Note: This equipment uses AlphaBlend technology for transparency
processing.
[Mode&Gain Display] Show/hide the mode/gain display
(at the top-left corner of the screen).
[Data Position] Selects where to display position data on the screen. The choices are
[Upper Left], [Lower Left], [Upper Right], or [Lower Right].
Menu item Description
⥙䝬䞊䜽
Sonde marks
Mode indication Mode indication
Gain indication
LF: 2.0