Furuno FSS-3BB, Operator'S Manual

Page: 76 / 121

3. SCREENSHOTS & DATA RECORDING
3-6
Note 3: Connect the external memory device to the USB port on the Processor Unit.
Do not connect the external memory device to the USB port on the Trackball Control
Unit.
Note 4: When an external memory device is connected and the capacity for the device
reaches its limit, recording is stopped and the message "Recording stopped because
memory capacity is full. Check capacity." appears.
Delete unnecessary files from the external memory device, or take other appropriate
measures to allow sufficient capacity to save the echo data.
Note 5: When the external memory device does not have sufficient memory to begin
data recording, and you attempt to record data, the message "Not enough memory to
start recording. Delete unnecessary files." appears.
Delete unnecessary files from the external memory device, or take other appropriate
measures to allow sufficient capacity to save the echo data.
3.2.2 How to play back recorded echo data
The playback function lets you view echo data you previously recorded. The display
mode used for playback should match the settings used when the echo data was re-
corded, or the echoes may not be displayed correctly.
Adjustments made to gain and other echo settings are not reflected to the echo data
being played back.
To play back recorded echo data, do the following:
1. Click the [Echo Recording] icon ( ) from the In-
stantAccess bar™, then click the [Play] icon ( ).
The file selection dialog shown in the right-hand
figure appears.
2. If you need to filter the files, select the filter button,
indicated in the figure on the previous page. The
[Filter Setting] window, shown below, appears. If
you do not need to filter the files, go to step 4.
Filter button
Cancel
File Select
Date filter
options
Position filter
options
Sort filter
options