Furuno FSS-3BB, Operator'S Manual

Page: 104 / 121

5. MAINTENANCE AND TROUBLESHOOTING
5-6
Processor Unit
System Error P01 The voltage of the battery inside the Pro-
cessor Unit is low. Turn the equipment
off, then contact your local dealer to re-
quest replacement of the battery. 3
P02 The fan is in the Processor Unit is rotat-
ing too slowly. Turn the equipment off,
then contact your local dealer to request
replacement of the fan. 4
P03 Multiple alike IP addresses found. Turn
the equipment off, then contact your lo-
cal dealer for advice. (IP address setup
cannot be changed from this equipment.
Change the IP address at the external
device.) 5
Transceiver Unit
System Error T01 Communication error between the
Transceiver Unit and Processor Unit.
Turn the equipment off, then contact
your local dealer for service. 2
T02 The rotating speed of the fan in the
Transceiver Unit is abnormal. Turn the
equipment off, then contact your local
dealer for service. 6
T03 Overcurrent detected in the Transceiver
Unit. Turn the equipment off, then con-
tact your local dealer for service. 7
T04 TX voltage error detected in the Trans-
ceiver Unit. Turn the equipment off, then
contact your local dealer for service. 8
T06 Transducer connection error (short cir-
cuit) detected. Turn the equipment off,
then contact your local dealer for ser-
vice. 9
Error
Icon
Error name
Error
code
Reason, remedy
Priority
Order