background image

1.  OPERATION

1-9

1

[Advanced Settings] menu icon.
Accesses the advanced settings menu; changes various settings for the FSS-3BB, and 
performs undo and redo actions.

[Internal Settings] menu.
Saves/loads data to/from the Processor Unit’s internal memory. See 
section 1.27.

[External Settings] menu.
Saves/loads data to/from an external memory device. See section 1.27.

[Advanced Settings] icon.
Accesses the [Advanced Settings] menu.
See section 1.5.
[Undo] icon.
“Undo” the last operation. See section 1.28.

[Redo] icon.
“Redo" the last operation. See section 1.28.

[Select External Memory Media] icon.
Selects where to save data on an external memory device. See 
section 3.3.

Note: 

Appears only in case of multiple memory devices.

Icon

Description/Options

Menu

Item

[Save Settings] icon: Saves current settings to media set to 
the Processor Unit.*
[Load Settings] icon: Loads settings from the media set to the 
Processor Unit.

*Eight sets of settings (                    )

 

 

 

 

 

 

 

 

 

  

~

[Save External Unit Settings] icon: Saves current settings to
an external memory device.

[Load External Unit Settings] icon: Loads settings from an
external memory device.

Summary of Contents for FSS-3BB


























































































































Reviews: