Furuno FSS-3BB Operator'S Manual Download

Page: 20 / 121

1. OPERATION

1-8

[Data Display] menu icon.
Accesses navigation data fed from external sources.
See section 1.22.

[Own Ship Position] icon.
Shows/hides own ship latitude and longitude.

[Time and Date] icon.
Shows/hides the time and date.

[Speed(SOG)] icon.
Shows/hides your vessel’s speed over the ground.

[Speed(STW)] icon.
Shows/hides your vessel’s speed through the water.

[Temperature] icon.
Shows/hides the water temperature.

[Echo Recording] menu icon.
Accesses the echo recording and screenshot functions.

[Record] icon.
Starts recording echo data. See section 3.2.1.

[Play] icon.
Plays back echo data. See section 3.2.2.

[Pause] icon.
Pauses the echo data playback. See section 3.2.2.

[Stop] icon.
• Stops echo data recording. See section 3.2.1.
• Stops echo data playback. See section 3.2.2.

[Multi-Screenshot Start/Stop] icon.
Takes multiple screenshots. See section 3.1.3.

Icon

Description/Options

Menu

Item

Summary of Contents for FSS-3BB


























































































































Search results

Summary of Contents for FSS-3BB

Reviews:

Related manuals for FSS-3BB

Brands by name

Popular brands

Furuno FSS-3BB, Operator'S Manual

Search results

Summary of Contents for FSS-3BB

Reviews:

Related manuals for FSS-3BB

Brands by name

Popular brands