Furuno FSS-3BB, Operator'S Manual

Page: 74 / 121

3. SCREENSHOTS & DATA RECORDING
3-4
How to filter the screenshots that are displayed
1. Click the filter icon ( ) at the top-left of the screen
to show the [Filter Setting] pop-up window
2. Select the appropriate check box to show the filter-
ing options. You can select either of, or both of the
filters.
• [Date Time]: Apply a filter based on date. You
can select a single filter (for example, filter by
month only) or a mixed filter (for example, filter by
year, month and date).
• [Position]: Apply a filter based on a specific loca-
tion and/or a nautical mile radius from the speci-
fied point.
3. Click [OK] to apply the filters.
3.1.5 How to copy screenshots from internal to external memory
You can copy screenshot files from the internal memory of the Processor Unit to an
external memory device (for example a USB flash drive).
Note 1: If the external memory device does not have the capacity to store the screen-
shot files, the error message "Not enough memory to copy screenshot. Delete unnec-
essary files." appears.
To rectify this problem, delete unnecessary files from the device to create room for the
screenshot files, then repeat the applicable procedure.
Note 2: If no external memory device is connected, the [Copy] ( ) and [Copy All] ( )
icons are greyed out. You cannot move files.
How to copy a single screenshot file
1. Long-push the scrollwheel on the Trackball Control Unit to show the screenshot
replay screen.
2. Click the arrow buttons ( or ( ) to select the file to copy.
3. Click the [Copy] ( ) icon at the bottom-right corner to copy the screenshot.
How to copy all screenshot files
1. Long-push the scrollwheel on the Trackball Control Unit to show the screenshot
replay screen.
2. Click the [Copy All] ( ) icon at the bottom-right corner to copy all screenshot files.