Furuno FSS-3BB, Operator'S Manual

Page: 52 / 121

2. GRAPH FUNCTIONS
2-4
7. To save as model data the echo histogram (measurement result) displayed on the
IDENTI-FISH
™
graph, click the [Save ID1 (or ID2) Data] button to show the [Save
ID1 (ID2) Data] window.
8. Click one among [NoName1] - [NoName9].
9. Click the [OK] button. A message "Saved. reference_YYYYMMDDhhmmss.ref"
appears. This is the file name and the date and time the data was saved.
10. Click the [OK] button to erase the message.
Note 1: If you selected [No NameX] (X: number) at step 8, register the relevant fish
species name, using a name that is easy to remember (see section 2.2.3).
Note 2: To use the model data saved above as a comparison target, set the corre-
sponding model data, referring to section 2.2.4.
2.2.3 How to register fish species
Follow the procedure below to register a fish species name in the model data.
1. Click the [Advanced Settings] icon ( ) from the InstantAccess bar™, then click
the [Advanced Settings] icon ( ) to show the [Advanced Settings] window.
2. Click [IDENTI-FISH] to show the [IDENTI-FISH] menu.
FSS-3BB [ 0252470-xx.xx ]