FEI Quanta FEG 250, User'S Operation Manual

Page: 71 / 228

Software Control: Entering Commands in Summary
4-43
TABLE 4-5 FUNCTION AND SPECIFIC KEY SHORT-CUTS
Key (+ Key) Function
F1 Displays On-Line Documentation
Shift + F1 Opens Image Properties dialogue
(Shift +) F2 Starts Photo (from all quads at once)
Ctrl + (Shift +) F2 Starts / Stops Active Preset Snapshot (from all quads at once)
F3 Toggles Videoscope On / Off
Shift + F3 Starts Home Stage procedure
F4 Starts / Stops Snapshot
Shift + F4 Starts Lens Alignment procedure
F5 Toggles Single / Quad Image mode
Ctrl + F5 Toggles Large Image Window mode
Shift + F5 Toggles Center Cross display
F6 Pauses / Resumes scanning
Shift + F6 Toggles Alignment rectangle display
F7 Toggles Reduced Area / Full Frame Mode
Ctrl + (Shift +) F7 Starts / Undo Image Post Processing
F8 Degauss
F9 Starts Auto Contrast and Brightness procedure
Shift + F9 Link Z to FWD
F11 Starts Auto Focus procedure
Ctrl + F11 Starts Auto Stigmator procedure
Shift + F11 Toggles Display Saturation function
(Shift +) F12 Toggles Compucentric (Scan) Rotation tool
Ctrl + 0 - number Moves stage to X=0, Y=0
Ctrl + B Toggles Beam Blank function
Ctrl + D Set Default Parameters
Ctrl + F Sets beam focus to WD = 10 mm
Ctrl + H Set Horizontal Field Width
Ctrl + K Sets Spot scanning conditions
Ctrl + M Sets Full Frame scanning conditions
Ctrl + Shift + M Starts movie recording dialogue
Ctrl + N Togles Sample Navigation
Ctrl + O - letter Opens Preferences dialogue
Ctrl + P Opens Print dialogue
Ctrl + R Restarts scan
Ctrl + (Shift +) S Save images (from all quads)
Ctrl + Z Moves stage to the last time position