FEI Quanta FEG 250, User'S Operation Manual

Page: 65 / 228

Software Control: xT microscope Control Software
4-37
Magnification Tab
controls the imaging and stored / printed image databar magnification
display. The constant imaging pixel size is set at the toolbar. When
storing / printing an image (while in a Single or Quad imaging mode)
the databar magnification display may not be correct.
FIGURE 4-22 MAGNIFICATION PREFERENCES
The Screen preferences area sets the imaging databar magnification
display behaviour while the File / Print preferences area sets the
storage / printing databar magnification display behaviour. Selecting
the radio button activates its functionality:
• The Real screen size : the imaging pixel width is handled.
– The Active view : the databar magnification value depends on
whether the Single or Quad UI imaging mode is selected. It is
displayed in the databar and stored / printed with an image with an
icon representing the Single / Quad UI imaging mode.
– The Single image : Single image mode magnification value is
displayed in the databar and stored / printed with an image.
– The 4-quad image : Quad image mode magnification value is
displayed in the databar and stored / printed with an image.
• The Polaroid 5” film width is handled. A recalculated
magnification value is displayed in the databar and stored / printed
with an image.
• The User device width (set by an user via the edit box) is
handled. A recalculated magnification value is displayed in the
databar and stored / printed with an image.
The Keep Screen and File / Print settings synchronized check box
keeps both settings identical.