FEI Quanta FEG 250, User'S Operation Manual, Page: 54 / 228

Software Control: xT microscope Control Software
4-26
8. The Stage Module
consists of the tabbed sections (see Chapter 7).
• The Map tab displays the stage positions location in a visual map
form and as a list for selection.
• The Coordinates tab displays numerical values of a particular
position. Stage movements along selected axes could be locked.
• The Tilt tab contains correction features for the tilted imaging.
• The Navigation tab helps to navigate across the sample surface.
Note:
The stage movement can be aborted by hitting the keyboard Esc key.
Don't hesitate to do so if you are not sure that the initiated movement
is safe!
FIGURE 4-13 THE STAGE MODULE
The Navigation tab
Click the Get button to capture a live image into the Navigation tab.
Drawing a green bordered box inside it depicts an observed area from
that point on.
By dragging and moving the box inside the navigation image an
observed position could be changed (affecting the active quad). By
dragging its boundary a box size could be changed, or it is also
possible to draw a new one.