Extreme Networks EAS 200-24p Switch, Manual

Page: 618 / 908

Chapter 43: Port Security Command List
Extreme Networks EAS 200-24p Switch CLI Manual
618
show port_security
Description
This command displays the port security related information, including state, maximum learned
addresses and lock address mode on a port and/or on a VLAN.
If both ports and vlanid (or vlan_name) are specified, configurations matching any of these parameters
will be displayed.
Format
show port_security {ports {<portlist>} {[vlan <vlan_name 32> | vlanid
<vidlist>]}}
Parameters
●
ports - (Optional) Specifies the range of ports that will show their configuration. While this
parameter is null, to show the entries on all of the ports.
●
<portlist> - Enter the list of port used for this configuration here.
●
vlan - (Optional) Specifies the name of the VLAN that will show its configuration.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
vlanid - (Optional) Specifies the ID of the VLAN that will show its configuration.
●
<vidlist> - Enter the VLAN ID list here.
Restrictions
None.
Example
To display the global configuration of port security:
EAS 200-24p:admin#show port_security
Command: show port_security
Port Security Log State : Disabled
System Maximum Address : no_limit
VLAN Configuration (Only VLANs with limitation are displayed):
VID VLAN Name Max. Learning Addr.
---- -------------------------------- ------------------
1 default 64
2 TstVLAN 8
1024 Guest 128
4094 Private 32
EAS 200-24p:admin#