Extreme Networks EAS 200-24p Switch, Manual

Page: 526 / 908

Chapter 33: MAC-based VLAN Command List
Extreme Networks EAS 200-24p Switch CLI Manual
526
show mac_based_vlan
Description
User can use this command to display the static or dynamic MAC-Based VLAN entry. If the MAC
address and VLAN is not specified, all static and dynamic entries will be displayed.
Format
show mac_based_vlan {mac_address <macaddr> | [vlan <vlan_name 32> | vlanid
<vlanid 1-4094>]}
Parameters
●
mac_address - (Optional) Specifies the entry that you would like to display.
●
<macaddr> - Enter the MAC address used here.
●
vlan - (Optional) Specifies the VLAN that you would like to display.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
vlanid - (Optional) Specifies the VLAN by VLAN ID.
●
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
None.
Example
In the following example, MAC address “00-80-c2-33-c3-45” is assigned to VLAN 300 by manual config.
It is assigned to VLAN 400 by Voice VLAN. Since Voice VLAN has higher priority than manual
configuration, the manual configured entry will become inactive. To display the MAC-based VLAN
entry:
EAS 200-24p:admin# show mac_based_vlan
MAC Address VLAN ID Status Type
----------------- ------- -------- -------------------
00-80-e0-14-a7-57 200 Active Static
00-80-c2-33-c3-45 300 Inactive Static
00-80-c2-33-c3-45 400 Active Voice VLAN
Total Entries : 3
EAS 200-24p:admin#