Extreme Networks EAS 200-24p Switch, Manual

Page: 687 / 908

config ssh server
Extreme Networks EAS 200-24p Switch CLI Manual
687
config ssh server
Description
This command configures the SSH server general information.
Format
config ssh server {maxsession <int 1-8> | contimeout <sec 120-600> | authfail
<int 2-20> | rekey [10min | 30min | 60min | never] | port <tcp_port_number 1-
65535>}
Parameters
●
maxsession - (Optional) Specifies SSH server maximum session at the same time, maximum 8
sessions.
●
<int 1-8> - Enter the maximum session value here. This value must be between 1 and 8.
●
contimeout - (Optional) Specifies SSH server connection time-out, in the unit of second.
●
<sec 120-600> - Enter the connection time-out value here. This value must be between 120 and
600 seconds.
●
authfail - (Optional) Specifies user maximum fail attempts.
●
<int 2-20> - Enter the user maximum fail attempts value here. This value must be between 2 and
20.
●
rekey - (Optional) Specifies time to re-generate session key. There are 10 minutes, 30 minutes, 60
minutes and never for the selection, which the never means do NOT re- generate session key
●
10min - Specifies that the re-generate session key time will be 10 minutes.
●
30min - Specifies that the re-generate session key time will be 30 minutes.
●
60min - Specifies that the re-generate session key time will be 60 minutes.
●
never - Specifies that the re-generate session key time will be set to never.
●
port - (Optional) Specifies the TCP port used to communication between SSH client and server. The
default value is 22.
●
<tcp_port_number 1-65535> - Enter the TCP port number here. This value must be between 1
and 65535.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.