Extreme Networks EAS 200-24p Switch, Manual

Page: 846 / 908

Chapter 65: Unicast Routing Command List
Extreme Networks EAS 200-24p Switch CLI Manual
846
create iproute
Description
Use this command to create an IP static route.
Selecting “primary” or “backup” means the newly created route is a floating static route.
If none of the following, “primary” or “backup”, is selected, the default route will:
1 be primary if there is no primary route that has the same destination;
2 be backup if there has been a primary route that has the same destination.
3 fail to create if there have been a primary route and a backup route that have the same destination.
4 fail to create if there has been one static multipath route that has the same destination.
It will fail if a user wants to create a floating static route and there has been one static multipath route
with the same destination.
It will fail if a user wants to create a static multipath route and there has been a floating static route,
whether primary or backup.
Format
create iproute [default] <ipaddr> {<metric 1-65535>} {[primary | backup]}
Parameters
●
default - Create an IP default route (0.0.0.0/0).
●
<ipaddr> - The IP address for the next hop router.
●
<metric 1-65535> - (Optional) Enter the metric value here. This value must be between 1 and 65535.
The default setting is 1.
●
primary - (Optional) Specify the route as the primary route to the destination.
●
backup - (Optional) Specify the route as the backup route to the destination.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a floating static route and a static multipath route:
EAS 200-24p:admin# create iproute default 10.1.1.254 primary
Command: create iproute default 10.1.1.254 primary
Success.
EAS 200-24p:admin#