Extreme Networks EAS 200-24p Switch, Manual

Page: 883 / 908

create wac user
Extreme Networks EAS 200-24p Switch CLI Manual
883
create wac user
Description
The create wac user command allows you to create account for web-base access control.
This user account is independent with login user account.
If VLAN is not specified, the user will not get a VLAN assigned after the authentication.
Format
create wac user <username 15> {[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]}
Parameters
●
user - User account for web-base access control.
●
<username 15> - Enter the user name here. This name can be up to 15 characters long.
●
vlan - (Optional) Specifies the target VLAN name for authenticated hosts which will uses this user
account to pass authentication.
●
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
●
vlanid - (Optional) Specifies the target VLAN ID for authenticated hosts which will uses this user
account to pass authentication.
●
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a WAC local user:
EAS 200-24p:admin# create wac user Jim
Command: create wac user Jim
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
EAS 200-24p:admin#