Extreme Networks EAS 200-24p Switch, Manual

Page: 203 / 908

show arpentry
Extreme Networks EAS 200-24p Switch CLI Manual
203
show arpentry
Description
This command is used to displays the ARP table. You can filter the display by IP address, MAC
address, Interface name, or static entries.
Format
show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static | mac_address
<macaddr>}
Parameters
●
ipif - (Optional) The name of the IP interface the end node or station for which the ARP table entry
was made, resides on.
●
<ipif_name 12> - Enter the IP interface name here. This value can be up to 12 characters long.
●
ipaddress - (Optional) The IP address of the end node or station.
●
<ipaddr> - Enter the IP address here.
●
static - (Optional) Display the static entries in the ARP table.
●
mac_address - (Optional) Displays the ARP entry by MAC address.
●
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To display the ARP table:
EAS 200-24p:admin# show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.1.1.1 00-02-03-04-05-06 Static
System 10.1.1.2 00-02-03-04-05-06 Dynamic
System 10.1.1.3 00-02-03-04-05-06 Static
System 10.90.90.90 00-01-02-03-04-00 Local
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries: 6
EAS 200-24p:admin#