Extreme Networks EAS 200-24p Switch, Manual

Page: 450 / 908

Chapter 27: IPv6 Route Command List
Extreme Networks EAS 200-24p Switch CLI Manual
450
create ipv6route
Description
Create an IPv6 default route. If the next hop is a global address, it is not needed to indicate the interface
name. If the next hop is a link local address, then the interface name must be specified.
Format
create ipv6route [default] [<ipif_name 12> <ipv6addr> |<ipv6addr>] {<metric
1-65535>} {[primary | backup]}
Parameters
●
default - Specifies the default route.
●
<ipif_name 12> - Specifies the interface for the route. This name can be up to 12 characters long.
●
<ipv6addr> - Specify the next hop address for this route.
●
<metric 1-65535> - Enter the metric value here. The default setting is 1. This value must between 1
and 65535.
●
primary - Specify the route as the primary route to the destination.
●
backup - Specify the route as the backup route to the destination. The backup route can only be
added when the primary route exists. If the route is not specified as the primary route or the backup
route, then it will be auto-assigned by the system. The first created is the primary, the second created
is the backup.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create and IPv6 route:
EAS 200-24p:admin# create ipv6route default System 3FFC:: 1 primary
Command: create ipv6route default System 3FFC:: 1 primary
Success.
EAS 200-24p:admin#