Extreme Networks EAS 200-24p Switch, Manual

Page: 574 / 908

Chapter 37: Multiple Spanning Tree Protocol (MSTP) Command List
Extreme Networks EAS 200-24p Switch CLI Manual
574
config stp mst_ports
Description
This command is used to configure the ports management parameters.
Format
config stp mst_ports <portlist> instance_id <value 0-15> {internalCost [auto |
<value 1-200000000>] | priority <value 0-240>}
Parameters
●
mst_ports - Specifies to be distinguished from the parameters of ports only at CIST level.
●
<portlist> - Enter a list of ports used for the configuration here.
●
instance_id - Specifies the instance ID used.
●
<value 0-15> - Enter the instance ID used here. This value must be between 0 and 15.
●
internalCost - (Optional) Specifies the port path cost used in MSTP.
●
auto - Specifies that the internal cost value will be set to auto.
●
<value 1-200000000> - Enter the internal cost value here. This value must be between 1 and
200000000.
●
priority - (Optional) Specifies the port priority value.
●
<value 0-240> - Enter the port priority value here. This value must be between 0 and 240.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure STP MST ports:
EAS 200-24p:admin# config stp mst_ports 1 instance_id 0 internalCost auto
Command: config stp mst_ports 1 instance_id 0 internalCost auto
Success.
EAS 200-24p:admin#