Extreme Networks EAS 200-24p Switch, Manual

Page: 634 / 908

Chapter 46: Protocol VLAN Command List
Extreme Networks EAS 200-24p Switch CLI Manual
634
create dot1v_protocol_group
Description
Create a protocol group for protocol VLAN function.
Format
create dot1v_protocol_group group_id < id> {group_name <name 32>}
Parameters
●
group_id - The ID of protocol group which is used to identify a set of protocols
●
<id> - Enter the group ID used here.
●
group_name - (Optional) The name of the protocol group. The maximum length is 32 chars. If group
name is not specified, the group name will be automatically generated in accordance with
Protocgroup_id. For example, the auto-generated name for group id 2 is ProtocolGroup2. If
the auto-generated name is in conflict with an existing group, an alternative name will be used in
accordance with ProtocgALT+num. The value for num starts with 1. If it is still in
conflict, then previous number will be used instead.
●
<name 32> - Enter the group name here. This name can be up to 32 characters long.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a protocol group:
EAS 200-24p:admin# create dot1v_protocol_group group_id 10 group_name
General_Group
Command: create dot1v_protocol_group group_id 10 group_name General_Group
Success.
EAS 200-24p:admin#