Extreme Networks EAS 200-24p Switch, Manual

Page: 338 / 908

Chapter 21: DHCP Relay Command List
Extreme Networks EAS 200-24p Switch CLI Manual
338
config dhcp_relay
Description
The config dhcp_relay command configures the DHCP relay feature of the switch.
Format
config dhcp_relay {hops <int 1-16> | time <sec 0-65535>}
Parameters
●
hops - (Optional) Specifies the maximum number of relay hops that the DHCP/BOOTP packets can
cross. The range is 1 to 16. The default value is 4. The DHCP packet will be dropped when the relay
hop count in the received packet is equal to or greater than this setting.
●
<int 1-16> - Enter the maximum number of relay hops here. This value must be between 1 and
16.
●
time - (Optional) The time field in the DHCP packet must be equal to or greater than this setting to
be relayed by the router. The default value is 0.
●
<sec 0-65535> - Enter the relay time here. This value must be between 0 and 65535 seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the DHCP relay hops and time parameters:
EAS 200-24p:admin# config dhcp_relay hops 4 time 2
Command: config dhcp_relay hops 4 time 2
Success.
EAS 200-24p:admin#