Extreme Networks EAS 200-24p Switch, Manual

Page: 812 / 908

Chapter 59: TFTP Client Command List
Extreme Networks EAS 200-24p Switch CLI Manual
812
upload
Description
This command is used to upload firmware and configuration from device to TFTP server.
Format
upload [cfg_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64>
{src_file <pathname 64>} {[include | exclude | begin] <filter_string 80>
{<filter_string 80> {<filter_string 80>}} {[include | exclude | begin]
<filter_string 80> {<filter_string 80> {<filter_string 80>}} {[include |
exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string
80>}}}}} | log_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> |
attack_log_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> |
firmware_toTFTP [<ipaddr> | <ipv6addr>] dest_file <path_filename 64> {src_file
<path_filename 64>}]
Parameters
●
cfg_toTFTP – Specifies that the configuration file will be uploaded to the TFTP server.
●
<ipaddr> - (Optional) The IP address of the TFTP server.
●
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
●
dest_file - (Optional) Used to identify the parameter “path_filename”.
●
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can be a
relative pathname or an absolute pathname. This name can be up to 64 characters long.
●
src_file - (Optional) Used to identify the parameter “path_filename”.
●
<pathname 64> - The pathname specifies an absolute pathname on the device file system. If
pathname is not specified, it refers to the boot_up CFG file. This name can be up to 64 characters
long.
●
include - (Optional) Specifies to include lines that contain the specified filter string.
●
exclude - (Optional) Specifies to exclude lines that contain the specified filter string.
●
begin - (Optional) The first line that contains the specified filter string will be the first line of the
output.
●
<filter_string 80> - (Optional) A filter string is enclosed by symbol. Thus, the filter string itself
cannot contain the character. The filter string is case sensitive. This string can be up to 80 characters
long.
●
log_toTFTP – Specifies that the system log will be uploaded to the TFTP server.
●
<ipaddr> - (Optional) The IP address of the TFTP server.
●
<ipv6addr> - (Optional) The IPv6 address of the TFTP server.
●
dest_file - (Optional) Used to identify the parameter “path_filename”.
●
<path_filename 64> - The pathname specifies the pathname on the TFTP server. It can be a
relative pathname or an absolute pathname. This name can be up to 64 characters long.
●
attack_log_toTFTP – Specifies that the attack log will be uploaded to the TFTP server.
●
<ipaddr> - (Optional) The IP address of the TFTP server.