Extreme Networks EAS 200-24p Switch, Manual

Page: 171 / 908

Extreme Networks EAS 200-24p Switch CLI Manual
171
C H A P T E R
7
Access Control List (ACL)
Egress Command List
●
create egress_access_profile profile_id <value 1-4> profile_name <name 1-32>
[ethernet {vlan {<hex 0x0-0x0fff>} | source_mac <macmask 000000000000-
ffffffffffff> | destination_mac <macmask 000000000000-ffffffffffff> | 802.1p |
ethernet_type} | ip {vlan {<hex 0x0-0x0fff>} | source_ip_mask <netmask> |
destination_ip_mask <netmask> | dscp | [icmp {type | code} | igmp {type} | tcp
{src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff> | flag_mask [all
| {urg | ack | psh | rst | syn | fin}]} | udp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask<hex 0x0-0xffff>} | protocol_id_mask <hex 0x0-0xff> {user_define_mask
<hex 0x0-0xffffffff>}]} | ipv6 {class | source_ipv6_mask <ipv6mask> |
destination_ipv6_mask <ipv6mask> | [tcp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff>} | udp {src_port_mask <hex 0x0-0xffff> |
dst_port_mask <hex 0x0-0xffff>} | icmp {type | code}]}]
●
delete egress_access_profile [profile_id <value 1-4> | profile_name <name 1-32> |
all]
●
config egress_access_profile [profile_id <value 1-4> | profile_name <name 1-32>]
[add access_id [auto_assign | <value 1-128>] [ethernet {[vlan <vlan_name 32> |
vlan_id <vlanid 1-4094>] {mask <hex 0x0-0x0fff>} | source_mac <macaddr> {mask
<macmask>} | destination_mac <macaddr> {mask <macmask>} | 802.1p <value 0-7> |
ethernet_type <hex 0x0-0xffff>} | ip {[vlan <vlan_name 32> | vlan_id <vlanid 1-
4094>] {mask <hex 0x0-0x0fff>} | source_ip <ipaddr> {mask <netmask>} |
destination_ip <ipaddr> {mask <netmask>} | dscp<value 0-63> | [icmp {type <value
0-255> | code <value 0-255>} | igmp {type <value 0-255>} | tcp {src_port <value
0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535> {mask <hex 0x0-
0xffff>} | flag [all | {urg | ack | psh | rst | syn | fin}]} | udp {src_port
<value 0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535> {mask <hex
0x0-0xffff>}} | protocol_id <value 0-255> {user_define <hex 0x0-0xffffffff> {mask
<hex 0x0-0xffffffff>}}]} | ipv6 {class <value 0-255> | source_ipv6 <ipv6addr>
{mask <ipv6mask>} | destination_ipv6 <ipv6addr> {mask <ipv6mask>} | [tcp {src_port
<value 0-65535> {mask <hex 0x0-0xffff>} | dst_port <value 0-65535> {mask <hex
0x0-0xffff>}} | udp {src_port <value 0-65535> {mask <hex 0x0-0xffff>} | dst_port
<value 0-65535> {mask <hex 0x0-0xffff>}} | icmp {type <value 0-255> | code <value
0-255>}]}] [vlan_based [vlan <vlan_name 32> | vlan_id <vlanid 1-4094>] |
port_group [id <value 1-64> | name <name 16>] | port <port>] [permit
{replace_priority_with <value 0-7> | replace_dscp_with <value 0-63> | counter
[enable | disable]} | deny] {time_range <range_name 32>} | delete access_id
<value 1-128>]
●
show egress_access_profile {[profile_id <value 1-4> | profile_name <name 1-32>]}
●
show current_config egress_access_profile
●
config egress_flow_meter [profile_id <value 1-4> | profile_name <name 1-32>]
access_id <value 1-128> [rate [<value>] {burst_size [<value>]} rate_exceed
[drop_packet | remark_dscp <value 0-63>] | tr_tcm cir <value> {cbs <value>} pir