Extreme Networks EAS 200-24p Switch, Manual

Page: 546 / 908

Chapter 36: Multicast Filter Command List
Extreme Networks EAS 200-24p Switch CLI Manual
546
config mcast_filter_profile ipv6
Description
This command adds or deletes a range of IPv6 multicast addresses to the profile.
Format
config mcast_filter_profile ipv6 [profile_id <value 1-24> | profile_name <name
1-32>] {profile_name <name 1-32> | [add | delete] <mcastv6_address_list>}(1)
Parameters
●
profile_id - ID of the profile.
●
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
●
profile_name - Provides a meaningful description for the profile.
●
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
●
profile_name - (Optional) Provides a meaningful description for the profile.
●
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
●
add - (Optional) Specifies to add an IPv6 multicast address.
●
delete - (Optional) Specifies to delete an IPv6 multicast address.
●
<mcastv6_address_list> - (Optional) Lists the IPv6 multicast addresses to put in the profile. You can
either specify a single IPv6 multicast IP address or a range of IPv6 multicast addresses connected by
‘-‘.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add the IPv6 multicast address range FFF0E::100:0:0:20 – FFF0E::100:0:0:22 to profile ID 3:
EAS 200-24p:admin# config mcast_filter_profile profile_id 3 add FF0E::100:0:0:20 -
FF0E::100:0:0:22
Command: config mcast_filter_profile profile_id 3 add FF0E::100:0:0:20 -
FF0E::100:0:0:22
Success.
EAS 200-24p:admin#