Extreme Networks EAS 200-24p Switch, Manual

Page: 196 / 908

Chapter 7: Access Control List (ACL) Egress Command List
Extreme Networks EAS 200-24p Switch CLI Manual
196
show port_group
Description
This command is used to display the port group information.
Format
show port_group {id<value 1-64> | name<name 16>}
Parameters
●
id - (Optional) Specifies the port group ID.
●
<value 1-64> - Enter the port group ID used here. This value must be between 1 and 64.
●
name - (Optional) Specifies the port group name.
●
<name 16> - Enter the port group name here. This name can be up to 16 characters long.
If not specified parameter, will show all the port group.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show all the port group information:
EAS 200-24p:admin# show port_group
Command: show port_group
Port Group Table
Group ID Group Name Ports
1 group1 1-2,5
2 group2 4-5,7,9,11,13
15,17,19-25
4 group3 5-7
Total Entries :3
EAS 200-24p:admin#