Extreme Networks EAS 200-24p Switch, Manual

Page: 659 / 908

config per_queue bandwidth_control
Extreme Networks EAS 200-24p Switch CLI Manual
659
config per_queue bandwidth_control
Description
Used to configure per port CoS bandwidth control.
Format
config per_queue bandwidth_control {ports [<portlist> | all]} <cos_id_list 0-
7> {{min_rate [no_limit | <value 64-1024000>]} max_rate [no_limit | <value 64-
1024000>]}
Parameters
●
ports - (Optional) Specifies a range of ports to be configured.
●
<portlist> - Enter the list of port used for this configuration here.
●
all - For set all ports in the system, you may use “all” parameter. If no parameter is specified,
system will set all ports.
●
<cos_id_list 0-7> - Specifies a list of priority queues. The priority queue number is ranged from 0 to
7.
●
min_rate - (Optional) Specifies that one of the parameters below (no_limit or <value m-n) will be
applied to the mini-rate at which the above specified class will be allowed to receive packets.
●
no_limit - Specifies that there will be no limit on the rate of packets received by the above
specified class.
●
<value 64-1024000> - Specifies the packet limit, in Kbps, that the above ports will be allowed to
receive. If the specified rate is not multiple of minimum granularity, the rate will be adjusted.
●
max_rate - (Optional) Specifies that one of the parameters below (no_limit or <value m-n >) will be
applied to the maximum rate at which the above specified class will be allowed to transmit packets.
●
no_limit - Specifies that there will be no limit on the rate of packets received by the above
specified class.
●
<value 64-1024000> - Specifies the packet limit, in Kbps, that the above ports will be allowed to
receive. If the specified rate is not multiple of minimum granularity, the rate will be adjusted.
Restrictions
Only Administrator level can issue this command.