Extreme Networks EAS 200-24p Switch, Manual

Page: 153 / 908

config access_profile
Extreme Networks EAS 200-24p Switch CLI Manual
153
●
<name 1-32> - Enter the profile name here. This name can be up to 32 characters long.
●
add - Specifies that a profile or a rule will be added.
●
access_id - Specifies the index of the access list entry. The value range is 1-256, but the supported
maximum number of entries depends on the project. If the auto_assign option is selected, the access
ID is automatically assigned, when adding multiple ports.
●
auto_assign - Specifies that the access ID will automatically be assigned.
●
<value 1-256> - Enter the access ID used here. This value must be between 1 and 256.
●
ethernet - Specifies to configure the ethernet access profile.
●
vlan - (Optional) Specifies the VLAN name.
●
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
●
vlan_id - (Optional) Specifies the VLAN ID used.
●
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
●
mask - (Optional) Specifies an additional mask parameter that can be configured.
●
<hex 0x0-0x0fff> - Enter the mask value here.
●
source_mac - (Optional) Specifies the source MAC address.
●
<macaddr> - Enter the source MAC address used for this configuration here.
●
mask - (Optional) Specifies an additional mask parameter that can be configured.
●
<macmask> - Enter the source MAC mask used here.
●
destination_mac - (Optional) Specifies the destination MAC address.
●
<macaddr> - Enter the destination MAC address used for this configuration here.
●
mask - (Optional) Specifies an additional mask parameter that can be configured.
●
<macmask> - Enter the destination MAC mask here.
●
802.1p - (Optional) Specifies the value of the 802.1p priority tag. The priority tag ranges from 1 to 7.
●
<value 0-7> - Enter the 802.1p priority tag value here.
●
ethernet_type - (Optional) Specifies the Ethernet type.
●
<hex 0x0-0xffff> - Enter the Ethernet type mask here.
●
ip - (Optional) Specifies to configure the IP access profile.
●
vlan - (Optional) Specifies a VLAN name.
●
<vlan_name 32> - Enter the name of the VLAN here. This name can be up to 32 characters long.
●
vlan_id - (Optional) Specifies that VLAN ID used.
●
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
●
mask - Specifies an additional mask parameter that can be configured.
●
<hex 0x0-0x0fff> - Enter the mask value here.
●
source_ip - (Optional) Specifies an IP source address.
●
<ipaddr> - Enter the source IP address used for this configuration here.
●
mask - Specifies an additional mask parameter that can be configured.
●
<netmask> - Enter the source netmask used here.
●
destination_ip - (Optional) Specifies an IP destination address.
●
<ipaddr> - Enter the destination IP address used for this configuration here.
●
mask - Specifies an additional mask parameter that can be configured.
●
<netmask> - Enter the destination netmask used here.