Extreme Networks EAS 200-24p Switch, Manual

Page: 735 / 908

Extreme Networks EAS 200-24p Switch CLI Manual
735
C H A P T E R
54
Simple Network Management
Protocol (SNMP) Command List
●
create snmp community <community_string 32> view <view_name 32> [read_only |
read_write]
●
delete snmp community <community_string 32>
●
show snmp community {<community_string 32>}
●
create snmp user <user_name 32> <groupname 32> {encrypted [by_password auth [md5
<auth_password 8-16> | sha <auth_password 8-20>] priv [none | des <priv_password
8-16>] | by_key auth [md5 <auth_key 32-32> | sha <auth_key 40-40>] priv [none |
des <priv_key 32-32>]]}
●
delete snmp user <username 32>
●
show snmp user
●
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]] {read_view <view_name 32> | write_view <view_name 32> | notify_view
<view_name 32>}
●
delete snmp group <groupname 32>
●
show snmp groups
●
create snmp view <view_name 32> <oid> view_type [included | excluded]
●
delete snmp view <view_name 32> [all | <oid>]
●
show snmp view {<view_name 32>}
●
create snmp [host <ipaddr> | v6host <ipv6addr>] [v1 | v2c | v3 [noauth_nopriv |
auth_nopriv | auth_priv]] <auth_string 32>
●
delete snmp [host <ipaddr> | v6host <ipv6addr>]
●
show snmp host {<ipaddr>}
●
show snmp v6host {<ipv6addr>}
●
config snmp engineID <snmp_engineID 10-64>
●
show snmp engineID
●
enable snmp
●
disable snmp
●
config snmp system_name {<sw_name>}
●
config snmp system_location {<sw_location>}
●
config snmp system_contact {<sw_contact>}
●
enable snmp traps