Extreme Networks EAS 200-24p Switch, Manual

Page: 399 / 908

config igmp_snooping data_driven_learning max_learned_entry
Extreme Networks EAS 200-24p Switch CLI Manual
399
config igmp_snooping data_driven_learning
max_learned_entry
Description
Used to configure the maximum number of groups that can be learned by data driven.
When the table is full, the system will stop the learning of the new data-driven groups. Traffic for the
new groups will be dropped.
Format
config igmp_snooping data_driven_learning max_learned_entry <value 1-1024>
Parameters
●
max_learned_entry - Specify the maximum number of groups that can be learned by data driven.
The suggested default setting is 56. This default setting may vary depending on projects.
●
<value 1-1024> - Enter the maximum learning entry value here. This value must be between 1
and 1024.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the maximum number of groups that can be learned by data driven:
EAS 200-24p:admin# config igmp_snooping data_driven_learning max_learned_entry 50
Command: config igmp_snooping data_driven_learning max_learned_entry 50
Success.
EAS 200-24p:admin#