Extreme Networks EAS 200-24p Switch, Manual

Page: 565 / 908

config stp mst_config_id
Extreme Networks EAS 200-24p Switch CLI Manual
565
config stp mst_config_id
Description
This command is used to change the name or the revision level of the MST configuration identification.
Format
config stp mst_config_id {revision_level <int 0-65535> | name <string>}
Parameters
●
name - (Optional) Specifies the name given for a specific MST region.
●
<string> - Enter the MST region name here.
●
revision_level - (Optional) The same given name with different revision level also represents
different MST regions.
●
<int 0-65535> - Enter the revision level here. This value must be between 0 and 65535.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To change the name and revision level of the MST configuration identification:
EAS 200-24p:admin# config stp mst_config_id name R&D_BlockG revision_level 1
Commands: config stp mst_config_id name R&D_BlockG revision_level 1
Success.
EAS 200-24p:admin#