Extreme Networks EAS 200-24p Switch, Manual

Page: 87 / 908

config 802.1x auth_parameter
Extreme Networks EAS 200-24p Switch CLI Manual
87
config 802.1x auth_parameter
Description
Use to configure the parameters that control the operation of the authenticator associated with a port.
Format
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction
[both | in] | port_control [force_unauth | auto | force_auth] | quiet_period
<sec 0-65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> | reauth_period <sec 1-
65535> | max_users [<value 1-448> | no_limit] | enable_reauth [enable |
disable]}(1)]
Parameters
●
ports - Specifies a range of ports to be configured.
●
<portlist> - Enter the list of ports used for the configuration here.
●
all - Specifies that all the ports will be used.
●
default - Sets all parameter to be default value.
●
direction - (Optional) Sets the direction of access control.
●
both - For bidirectional access control.
●
in - For unidirectional access control.
●
port_control - (Optional) You can force a specific port to be unconditionally authorized or
unauthorized by setting the parameter of port_control to be force_authorized or force_unauthorized.
Besides, the controlled port will reflect the outcome of authentication if port_control is auto.
●
force_unauth - Force a specific port to be unconditionally unauthorized.
●
auto - The controlled port will reflect the outcome of authentication.
●
force_auth - Force a specific port to be unconditionally authorized.
●
quiet_period - (Optional) It is the initialization value of the quietWhile timer. The default value is 60
seconds and can be any value among 0 to 65535.
●
<sec 0-65535> - Enter the quiet period value here. This value must be between 0 and 65535
seconds.
●
tx_period - (Optional) It is the initialization value of the transmit timer period. The default value is
30 seconds and can be any integer value among 1 to 65535.
●
<sec 1-65535> - Enter the tx period value here. This value must be between 1 and 65535 seconds.
●
supp_timeout - (Optional) The initialization value of the aWhile timer when timing out the
supplicant. Its default value is 30 seconds and can be any integer value among 1 to 65535.
●
<sec 1-65535> - Enter the supplicant timeout value here. This value must be between 1 and 65535
seconds.
●
server_timeout - (Optional) The initialization value of the aWhile timer when timing out the
authentication server. Its default value is 30 seconds and can be any integer value among 1 to 65535.
●
<sec 1-65535> - Enter the server timeout value here. This value must be between 1 and 65535
seconds.