Extreme Networks EAS 200-24p Switch, Manual

Page: 275 / 908

config cfm ma
Extreme Networks EAS 200-24p Switch CLI Manual
275
config cfm ma
Description
This command is used to configure the parameters of a maintenance association. The MEP list specified
for an MA can be located in different devices. MEPs must be created on the ports of these devices
explicitly. An MEP will transmit a CCM packet periodically across the MA. The receiving MEP will
verify these received CCM packets from the other MEPs against this MEP list for the configuration
integrity check.
Format
config cfm ma [<string 22> | ma_index <uint 1-4294967295>] md [<string 22> |
md_index <uint 1-4294967295>] {vlanid <vlanid 1-4094> | mip [none | auto |
explicit | defer] | sender_id [none | chassis | manage | chassis_manage |
defer] | ccm_interval [10ms | 100ms | 1sec | 10sec | 1min | 10min] |
mepid_list [add | delete] <mepid_list>}
Parameters
●
ma - Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name here. This name can be up to 22 characters
long.
●
ma_index - Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be
between 1 and 4294967295.
●
md - Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name here. This name can be up to 22 characters
long.
●
md_index - Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
●
vlanid - (Optional) Specifies the VLAN Identifier. Different MAs must be associated with different
VLANs.
●
<vlanid 1-4094> - Enter the VLAN ID used here. This value must be between 1 and 4094.
●
mip - (Optional) This is the control creation of MIPs.
●
none - Specifies not to create MIPs.
●
auto - MIPs can always be created on any ports in this MA, if that port is not configured with an
MEP of that MA.
●
explicit - MIP can be created on any ports in this MA, only if the next existing lower level has an
MEP configured on that port, and that port is not configured with an MEP of this MA.
●
defer - Inherit the setting configured for the maintenance domain that this MA is associated with.
This is the default value.
●
sender_id - (Optional) This is the control transmission of the sender ID TLV.
●
none - Do not transmit the sender ID TLV. This is the default value.
●
chassis - Transmit the sender ID TLV with the chassis ID information.