Extreme Networks EAS 200-24p Switch, Manual

Page: 610 / 908

Chapter 43: Port Security Command List
Extreme Networks EAS 200-24p Switch CLI Manual
610
config port_security system max_learning_addr
Description
This command sets the maximum number of port security entries that can be authorized system wide.
There are four levels of limitations on the learned entry number; for the entire system, for a port, for a
VLAN, and for a specific VLAN on a port. If any limitation is exceeded, the new entry will be
discarded.
The setting for system level maximum learned users must be greater than the total of maximum learned
users allowed on all ports.
Format
config port_security system max_learning_addr [<max_lock_no 1-3072> |
no_limit]
Parameters
●
max_learning_addr - Specifies the maximum number of port security entries that can be learned by
the system. If the setting is smaller than the number of current learned entries on all enabled ports,
the command will be rejected.
●
<max_lock_no 1-3072> - Enter the maximum learning address value here. This value must be
between 1 and 3072.
●
no_limit - No limitation on the number of port security entries that can be learned by the system.
By default, the number is set to no_limit.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of port security entries on the switch to be 256:
EAS 200-24p:admin# config port_security system max_learning_addr 256
Command: config port_security system max_learning_addr 256
Success.
EAS 200-24p:admin#