Extreme Networks EAS 200-24p Switch, Manual

Page: 135 / 908

config authen server_host
Extreme Networks EAS 200-24p Switch CLI Manual
135
config authen server_host
Description
This command is used to configure an authentication server host.
Format
config authen server_host <ipaddr> protocol [tacacs | xtacacs | |
radius] {port <int 1-65535> | key [<key_string 254> | none ] | timeout <int 1-
255> | retransmit <int 1-20>}
Parameters
●
server_host - Server host’s IP address.
●
<ipaddr> - Enter the server host IP address here.
●
protocol - Specifies the server host's authentication protocol.
●
tacacs - Server host’s authentication protocol.
●
xtacacs - Server host’s authentication protocol.
●
- Server host’s authentication protocol.
●
radius - Server host’s authentication protocol.
●
port - (Optional) The port number of authentication protocol for server host. Default value for
TACACS/XTACACS/ is 49. Default value for RADIUS is 1812.
●
<int 1-65535> - Enter the port number here. This value must be between 1 and 65535.
●
key - (Optional) The key for and RADIUS authentication. If the value is null, no
encryption will apply. This value is meaningless for TACACS and XTACACS.
●
<key_string 254> - Enter the key here. This value can be up to 254 characters long.
●
none - No encryption for and RADIUS authentication. This value is meaningless for
TACACS and XTACACS.
●
timeout - (Optional) The time in second for waiting server reply. Default value is 5 seconds.
●
<int 1-255> - Enter the timeout value here. This value must be between 1 and 255 seconds.
●
retransmit - (Optional) The count for re-transmit. This value is meaningless for . Default
value is 2.
●
<int 1-20> - Enter the re-transmit value here. This value must be between 1 and 20.
Restrictions
Only Administrator-level users can issue this command.