Extreme Networks EAS 200-24p Switch, Manual

Page: 143 / 908

config admin local_enable
Extreme Networks EAS 200-24p Switch CLI Manual
143
config admin local_enable
Description
This command is used to config the local enable password of administrator level privilege. When the
user chooses the “local_enable” method to promote the privilege level, the enable password of local
device is needed. When the password information is not specified in the command, the system will
prompt the user to input the password interactively. For this case, the user can only input the plain text
password. If the password is present in the command, the user can select to input the password in the
plain text form or in the encrypted form. The encryption algorithm is based on SHA-I.
Format
config admin local_enable
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the administrator password:
EAS 200-24p:admin# config admin local_enable
Command: config admin local_ebable
Enter the old password:
Enter the case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
EAS 200-24p:admin#