Extreme Networks EAS 200-24p Switch, Manual

Page: 892 / 908

Chapter 68: Web-Based Access Control (WAC) Command List
Extreme Networks EAS 200-24p Switch CLI Manual
892
clear wac auth_state
Description
Used to clear the authentication state of a port. If the port is port-based mode, the port will return to
un-authenticated state. The entire timer associated with the port will be reset.
If the port is host based mode, users on this port will be cleared. The user needs to be re-authenticated
to access the network.
Format
clear wac auth_state [ports [<portlist> | all] {authenticated | authenticating
| blocked} | macaddr <macaddr>]
Parameters
●
ports - Specifies the list of ports whose WAC state will be cleared.
●
<portlist> - Enter a list of ports used for the configuration here.
●
all - Specifies that all the ports will be used for this configuration.
●
authenticated - (Optional) Specified to clear all authenticated users for a port.
●
authenticating - (Optional) Specified to clear all authenticating users for a port.
●
blocked - (Optional) Specified to clear all blocked users for a port.
●
macaddr - Specifies the MAC address of the users to be cleared.
●
<macaddr> - Enter the MAC address of the users to be cleared here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete WAC hosts on ports 1 to 5:
EAS 200-24p:admin# clear wac auth_state ports 1-5
Command: clear wac auth_state ports 1-5
Success.
EAS 200-24p:admin#