Extreme Networks EAS 200-24p Switch, Manual

Page: 613 / 908

config port_security vlan
Extreme Networks EAS 200-24p Switch CLI Manual
613
config port_security vlan
Description
This command sets the maximum number of port security entries that can be learned on a specific
VLAN.
There are four levels that limit the number of learned entries; the entire system, a port, a VLAN, and a
specific VLAN on a port. If any limitation is exceeded, the new entry will be discarded.
Format
config port_security vlan [<vlan_name 32> | vlanid <vidlist>]
max_learning_addr [<max_lock_no 0-3072> | no_limit]
Parameters
●
vlan - Specifies the VLAN by name.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
vlanid - Specifies a list of VLANs by VLAN ID.
- <vidlist> - Enter the VLAN ID list here.
●
max_learning_addr - Specifies the maximum number of port security entries that can be learned by
this VLAN. If this parameter is set to 0, it means that no user can be authorized on this VLAN. If the
setting is lower than the number of current learned entries on the VLAN, the command will be
rejected. The default value is “no_limit”
●
<max_lock_no 0-3072> - Enter the maximum number of port security entries that can be learned
here. This value must be between 0 and 3072.
●
no_limit - No limitation on the number of port security entries that can be learned by a specific
VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the maximum number of VLAN-based port security entries on VLAN 1 to be 64:
EAS 200-24p:admin# config port_security vlan vlanid 1 max_learning_addr 64
Command: config port_security vlan vlanid 1 max_learning_addr 64
Success.
EAS 200-24p:admin#