Extreme Networks EAS 200-24p Switch, Manual

Page: 291 / 908

show cfm fault
Extreme Networks EAS 200-24p Switch CLI Manual
291
show cfm fault
Description
This command displays all the fault conditions detected by the MEPs contained in the specified MA or
MD. This display provides the overview of the fault status by MEPs.
Format
show cfm fault {md [<string 22> | md_index <uint 1-4294967295>] {ma [<string
22> | ma_index <uint 1-4294967295>]}}
Parameters
●
md - (Optional) Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name used here. This name can be up to 22
characters long.
●
md_index - (Optional) Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value must be
between 1 and 4294967295.
●
ma - (Optional) Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name used here. This name can be up to 22
characters long.
●
ma_index - (Optional) Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value must be
between 1 and 4294967295.
Restrictions
None.
Example
To show the CFM faults:
EAS 200-24p:admin# show cfm fault
Command: show cfm fault
MD Name MA Name MEPID Status AIS Status LCK Status
----------- ----------- ----- ---------------------- ------------ ------------
op_domain op1 1 Cross-connect CCM Received
EAS 200-24p:admin#