manualshive.com logo in svg

Emerson Site Manager, User Manual, Page: 83 / 130

Share
Download
Emerson Site Manager User Manual Download Page 83

Configuring Activities

Configuration • 75

Click Save to save changes and see the confirma-

tion screen. Click Cancel to exit. 

7.1.3. Configure Backup

To configure the Backup activity, right-click in the 

navigation tree to access Configure Backup, and 
configure from the Configure Backup page. You can 
use the default value or choose a user-specified num-
ber.

To run the Backup, right-click from the navigation 

tree to access Backup, or click Backup from a prop-
erties page.  

The Configure Backup page will display the fol-

lowing information about the activity you are config-
uring:

• Activity: Which activity you are configuring.

• Item: The controller and type being configured.

• Number of Backups to Keep: To use the default, 

enable the first radio button to use the default value 
of 4. (If a fifth backup is performed, the oldest Back-
up will be overridden.) If you wish to keep five 
backups or more, enable the second radio button and 
the desired value (1-100) into the field. 

• Keep Forever: Enable this checkbox to store the de-

sired backup in the database indefinitely. This op-
tion is available for each Backup.

• Backup Time/Date: The date and time the activity 

was requested to start. 

• Backup Info: The type of controller and version 

number.

• Comments: Enter any comments about the backup 

in this field. 

Click Save to store the information or Cancel to 

exit.

7.1.4. Configure Log Purge

Activity History data is stored in the database but 

can be deleted with the Configure Log Purge feature. 
The Configure Log Purge page allows you to set pa-

Figure 7-4 - Advisory Snooze Configuration Page

Figure 7-5 - Backup Menu

Figure 7-6 - Configure Backup Page

Summary of Contents for Site Manager



































































































































Reviews:

No comments