Emerson Site Manager, User Manual

Page: 63 / 130

Executing Activities Navigation Tree • 55
The Setpoint Broadcast activity can be run imme-
diately (Run Now) from an application instance level
on the navigation tree. Running this activity from an
application instance will use the data of that applica-
tion instance to populate a new Application Setpoint
Group.
To run Setpoint Broadcast from an application in-
stance, right-click the application instance on the nav-
igation tree and click Create Setpoint Broadcast.
The Application Setpoint Group box will display
on top of the Activity Startup page.
In the Name field, enter a unique name for the ap-
plication setpoint group (required). If the name exists
already in the database, a screen will open and prompt
you to rename the broadcast.Click Save. The Name
field cannot be left blank.
The Type drop-down field will be disabled. The
data of the chosen application instance will be used to
populate information for this field.
Click Save to save the new application setpoint
group. The new application setpoint group will add to
the list of current application setpoint groups under
the Application Setpoint Group section.
Select where to send the setpoints by selecting a
target controller group or by creating a new target
controller group from this page.
Click Go to start the Setpoint Broadcast activity.
The status of the activity will display on the main win-
dow:
The status of the activity will be saved in Activity
History and can be viewed from that page.
Setpoint Broadcast can also be scheduled from this
page by enabling the Run On Schedule radio button.
To setup Setpoint Broadcast schedule, see Section
3.3.2., Setpoint Broadcast of this manual.
Figure 4-48 - Create Setpoint Broadcast Menu
Figure 4-49 - Run Setpoint Broadcast Immediately
Figure 4-50 - Setpoint Broadcast Activity Progress Bar