Emerson Site Manager, User Manual

Page: 48 / 130

40 • Site Manager User Manual 026-1012 Rev 3 06-DEC-2011
4.3. Site
A site is the name for a collection of one or more
control systems in one physical location such as a gro-
cery store. Under each site, there will be a Control
System with listed units such as Einstein or E2.
Clicking on the site will open the properties page
for the site in the main navigation window. Right-
click for the More Site Tasks menu.
4.3.1. Add Control System
To add a Control System, use the desired Control
System’s mouse-over/right-click menu from the nav-
igation tree and click Add Control System. The Con-
trol System Configuration page opens:
Enter Name (required field), Protocol Type,
Connection Type, IP Address (required field), and
Port information. Click the Save button to save or the
Cancel button to clear and exit the page.
• Enter a name for the control system in the Name
field. This name will appear in the navigation tree.
• Set the Protocol Type to E1 or E2 depending on the
type of controller you are using.
• The Connection Type is defaulted to IP.
• Enter the IP address of the controller to which you
are connecting in the IP Address field. If the Vali-
date IP Address checkbox is enabled (default),
only a valid IP address will be accepted. If an invalid
address is entered, a message will appear to notify
you that an invalid address has been entered.
• Enter the Port number of the device to which you are
connecting in the Port field.
• The Advisory Commissioning Port is the port used
for receiving advisories after commissioning is
complete.
Optional section: If this protocol checkbox is en-
abled at the control system level, Site Manager will
use the protocol information entered on this page and
bypass the information at the Group level for only the
units located under this control system. Normally, se-
curity settings for Site Manager are defaulted at the
Group Configuration level.
Click the Save button to save or the Cancel button
to clear and exit the page.
4.3.2. Delete Site
To delete a site, select Delete Site from the desired
Site’s menu in the navigation tree (under the More
Site Tasks flyout menu).
A message window will open and ask if you want
to delete the site. Click OK to delete, Cancel to exit.
Figure 4-8 - Control System Configuration Page
NOTE: A control system cannot be added from
a Control System menu. You must create a
control system from a Site. A Control System is
a descendant level of a Site.
Figure 4-9 - Delete Site