Emerson Site Manager, User Manual

Page: 40 / 130

32 • Site Manager User Manual 026-1012 Rev 3 06-DEC-2011
3.3.1.3. Advisory Forwarding
With the Advisory Forwarding feature, advisories
can be forwarded to an email address. See Section
6.2.3., Advisory Forwarding for more information
about advisory forwarding.
3.3.2. Setpoint Broadcast
When store hours change or special events occur,
scheduling a Setpoint Broadcast can send data to mul-
tiple groups, sites, and/or multiple controllers at one
site, and provides the ability to send setpoint and pa-
rameter information across a single enterprise.
Based on the user’s privilege, all configured set-
point broadcasts will be displayed (if any). If there are
no existing setpoint broadcasts scheduled in the sys-
tem, you will be taken directly to the Schedule Man-
ager page with the activity Type pre-filled to Setpoint
Broadcast.
To configure a setpoint broadcast, select Setpoint
Broadcast from the Type drop down. If Run Now is
selected, click Go when you are ready to run the
broadcast, and the broadcast will be run immediately
instead of according to a schedule. Click Run On
Schedule to run the broadcast according to the sched-
ule details.
Running Setpoint Broadcast on a schedule
Enter unique name for each setpoint broadcast in
the Name field. You will be notified if the name al-
ready exists in the database and prompted to rename
the broadcast before you can save. This field cannot
be left blank.
Choose how often the broadcast will be run: one-
time only, at intervals, or based on calendar informa-
tion:
• Run Once: For one-time only broadcasts, enter the
start date and time the broadcast will be run. The
broadcast will only be run at that date and time. (On-
ly the options for Run Once will be visible.)
• Interval-Based Schedules: For running the broad-
cast based on an interval, enter start/end date and
time and interval information in the HH:MM format
provided. Enter the number of how many times the
broadcast should repeat in the Number of times to
repeat field. Leave this field blank if you would like
the process to repeat indefinitely. (Only the options
for Interval Based will be visible.)
• Calendar-Based Schedules: For running the
broadcast based on calendar information, enter the
start/end date and time and choose how often the
broadcast will occur (daily, weekly, monthly).
When a day of the week or month is selected or
multi-selected, they become highlighted. Choose
ALL to select everything in the list or Clear to de-
select and start over.
Email Notification
Notification can be sent concerning the status of
the schedule based on two options:
• On Success: Activity was successful.
• On Unsuccessful: Activity was unsuccessful,
which means partially completed or failed.
Figure 3-48 - Configuring Setpoint Broadcast
Figure 3-49 - Notify Setpoint Broadcast