37
Initial start-up
Room Controller KNX Touch One
• Status: 29.04.2014 • Errors excepted. Subject to technical changes.
3.2.
Alarm and error messages
Alarm messages are always prioritised before error messages.
When an alarm has already been triggered and displayed on the
start screen, error messages are no longer visible.
3.2.1.
Warning messages
In case of an alarm message from the bus, the display switches to start menu and
shows the message. You can acknowledge alarm messages directly on the unit by
pressing the relevant alarm message in the display.
Settings > Alarm
Setting an alarm at the screen, page 74
3.2.2.
Error messages
Error Messages in the start menu/in the waether data display:
No drives available!
is displayed as long as there are no drives and no lights set in the ETS (e. g.
at first commissioning).
Please set the time!
is displayed if a drive or light is set, but there has (still) been no time signal reception
(e. g. afer a restart). Once date and time have been received, this message disappears.
Time and date are the basis for the timer, that allows for definition of up to 16 time pe-
riods for different automatic functions.
Settings > Date and time.
Enter the date and time at the screen, page 59
No connection to weather station!
is displayed if a drive or light is set, but there has (still) been no weather data reception
(e. g. afer a restart). Once values for rain, external temperature, wind speed and bright-
ness have been received from the bus, this message disappears.
If the monitoring of the wind and rain object is active, you should ensure that weather
data can be received within the defined monitoring intervall. The monitoring of the
wind and rain object is active and set to “every 5 seconds“ by default.
No connection to KNX bus!
is displayed:
•
during ETS download (ETS transfers the data to the unit)
•
when unloading the device in the ETS
